Home > Products > Solids Control Equipment > Drilling Decanter Centrifuge
Drilling Decanter Centrifuge

    Drilling Decanter Centrifuge

  • KOSUN DC Series Drilling Decanter Centrifuge is used to separate suspended solids 2m in diameter and treat the drilling mud and fluids. Decanter centrifuge is especially effective when used in oilfield service industry, industrial service industry and especially in environmentally sensitive areas. This type of centrifuge is high in recovery rate, effective in solids control and remarkable in the reduction of cost spent on drilling mud resupplying and management.KOSUNdecanter centrifuge is a very sophiscated dynamic balancing machine, able to operate stably with the whirling speed ranging from 0 to 3900 and generate centrifugal force of 3000G. Features and Benefits of Drilling Decanter Centrifuge: 1. Innovative design includes longer bowl, allowing drilling fluids to thread through more slo...
Drilling Decanter Centrifuge Overview

KOSUN DC Series Drilling Decanter Centrifuge is used to separate suspended solids ≥2μm in diameter and treat the drilling mud and fluids. Decanter centrifuge is especially effective when used in oilfield service industry, industrial service industry and especially in environmentally sensitive areas. This type of centrifuge is high in recovery rate, effective in solids control and remarkable in the reduction of cost spent on drilling mud resupplying and management.KOSUN decanter centrifuge is a very sophiscated dynamic balancing machine, able to operate stably with the whirling speed ranging from 0 to 3900 and generate centrifugal force of 3000G.

Features and Benefits of Drilling Decanter Centrifuge:

1. Innovative design includes longer bowl, allowing drilling fluids to thread through more slowly, thus resulting in drier solids and finer separation point;

2. Big bowl offers big volume. It also generates high-G force;

3. Stainless steel bowl, scroll, compartment are available and covered with corrosion-proof coating so as to have longer lifespan;

4. Tungsten carbide scroll points with wide spacing flights at tapered end create a finer layer of conveyed solids for consistent, uniform separation and maximum solids control efficiency.

5. German FAG or Swedish SKF brand bearings are available;

6. Electrical Components complies with SIEMENS/Schneider ATEX or IEC Ex.

7. Screw pump, centrifugal pump and feeding pump are provided to meet different applications.

Working Principle of Drilling Fluids Decanter Centrifuge:

DC Decanter Centrifuge is driven by two motors. The main motor drives the drum and the outer casing of differential through belts while the auxiliary motor, after the differential shifting speed, drives the spiral propeller. This will make the drum and the spiral propeller rotate in the same direction with a certain differential speed.

KOSUN Decanter Centrifuge can meet with different requirements of mud treatment under various drilling conditions, that can do sedimentation and separation for particles more than 2 μm. After treatment, the mud can achieve ideal viscosity and proportion, resulting in better recycling, high efficiency, saving and environment protection.

The series of decanter centrifuge by our company has been developed many years with the continuous improvement and optimization design, which possesses the characteristics of good result of separation and settlement, as well as large quantity, reliable work, longer life, lower energy consumption, easy maintenance, smooth operation, lower noises, etc.

To ensure that the effective treatment result and long service life, the important parts adopts high quality stainless steel, forging material, strengthen heat treatment and strict control processing. And on each part that easily wears take spraying wear-resisting layer and mosaic of hard alloy, etc. The overflow of the main drum mouth using adjustable poling board, it can be adjusted anytime according to different sludge treatment .

To meet the requirements of the development of modern drilling engineering, KOSUN developed and equipped with the explosion-proof variable frequency control system which could adjust separation factor and drum rotational speed. By this new technology, make the decanter centrifuge adapt property changing of mud during the operation process, that makes the treatment more effective and perfect.

A VFD ( Variable Frequency Drive ) module monitors and controls both the main and back electric drives. The operator can manage bowl and scroll speeds via a touchscreen that also displays input from the various sensors, including temperature, current, rotational speed and vibration.

Since 1992, with more than 20 years of industrial experience of manufacturing and design, KOSUN has won its reputation across the worldwide clients. It is the largest and professional drilling solids control equipment manufacturer in China. It can provide and design full range of solids control equipment for different operation capacities and requirements. The main products of KOSUN include shale shaker, decanter centrifuge, desander, desilter, mud cleaner, dryer shaker,vertical centrifuge,vacuum degasser, shale shaker screen,centrifugal pump, submersible slurry pump, shear pump, mud agitator, mud gun, jet mud mixer, mud tank, diesel tank, water tank, complete solids control system, etc.

Drilling Decanter Centrifuge Technical Data
Message
Your Name:
*Email:
Phone Number:
Country or Region:
*Message:
 

Welcome To Xi’an KOSUN Machinery Co., Ltd.

Solids Control Equipment & Integrated Drilling Waste Management